manualshive.com logo in svg

NEC SOPHO IP 5000, Command Reference Manual, Page: 183 / 191

Share
Download
NEC SOPHO IP 5000 Command Reference Manual Download Page 183

 

 

SOPHO 

IP 5000/SOPHO IP6000 

 

Command Reference Guide 

 

183

 

Description  

Using the 

interface

 command, you can create sub-interface of point to 

multipoint  or point to point types. Using the 

undo interface

 command, you can 

delete  specified sub-interface.  
 
By default, the type of sub-interface is point to multipoint.  
 
Presently, point to multipoint or point to point sub-interface can be configured to  
ATM interface, interface with frame relay or X.25 as its link layer protocol type. 
In  contrast, sub-interface of Ethernet is of broadcast type.  
 
Up to 1024 sub-interfaces can be created for one main-interface.  
 

Example  

Create a sub-interface on ATM interface 2/0/0.  
<NEC-PHILIPS> 

system-view  

 [NEC-PHILIPS] 

interface atm 2/0/0.1  

[NEC-PHILIPS-Atm2/0/0.1]  
 
 

interface ethernet  

Syntax  
interface ethernet interface-number.subinterface-number  
 
undo interface ethernet interface-number.subinterface-number  
 
View  

System view  
 

Parameter  
interface-number

: Number of interface, including slot number, card number, and  

port number.  
 

subinterface-number

: Number of sub-interface, ranging from 0 to 4096.  

 
Description  

Using the 

interface ethernet

 command, you can create Ethernet sub-interface.   

 
Using the 

undo interface ethernet

 command, you can delete specified 

Ethernet  sub-interface.  
 
Ethernet sub-interface is used for VLAN configuration. For a detailed 
configuration  procedure for VLAN, refer to the section Link Layer Protocol 
chapter in the 

NEC-PHILIPS  Router Configuration Guide

.  

 
Up to 256 sub-interfaces can be created for one Ethernet interface.  
 

Example  

Create a sub-interface on Ethernet interface 1/0/0.  
[NEC-PHILIPS] 

interface ethernet 1/0/0.1  

[NEC-PHILIPS-Ethernet1/0/0.1]  

 

Summary of Contents for SOPHO IP 5000
































































































































































































Reviews:

No comments