SOPHO
IP 5000/SOPHO IP6000
Command Reference Guide
18
interface-number
: Interface number.
Description
Using the
display debugging
command, you can display the enabled
debugging switches.
By default, no parameters have been defined and all the enabled debugging
switches are displayed.
For related command, see
debugging
.
Example
Display all the enabled debugging switches.
<NEC-PHILIPS>
display debugging
IP packet debugging switch is on.
display diagnostic-
Syntax
information
display diagnostic information
View
Any view
Parameter
None
Description
Using the
display diagnostic-information
command, you can display the
operating information of all the active modules of the system and collect all the
information at one time to isolate the problem when failure occurs to the system.
In case failures occurs to the system, lots of information needs to be collected
for the convenience of isolating the problems. However, it is rather difficult for
you to collect all the information at one time because there are many display
commands involved. In this case, you can use the
display diagnostic-
information
command to collect the operating information of all the active
modules in the system.
Example
Display the technical support information.
<NEC-PHILIPS>
display diagnostic-information
------------------ display version -----------------
NEC-PHILIPSNEC-PHILIPS Versatile Routing Platform Software
VRP 3600E Software Version
VRPV3R001M06B03D003, DEBUG SOFTWARE
Copyright (c) 2000-2003 by VRP Team Beijing Institute NEC-PHILIPS Tech, Inc
Compiled Mar 24 2003 20:28:31 by zhaomin
------------------ display running-config -----------------
#
sysname NEC-PHILIPS
#
------------------ display history commands -----------------
display diagnostic-information
------------------ display tasks -----------------
ID
Name
Priority
Status
CPU Time
1
WEIL
10
Ready
10/20
2
SYST
180
Ready
0/7
3
XMON
140
Event Sem
0/0
4
VMON
140
Event Sem
41/41
5
INFO
100
Event Sem
1/6
6
co0
100
Ready
0/3178
