NEC SOPHO IP 5000 Command Reference Manual Download Page 43

Page: 43 / 191

SOPHO

IP 5000/SOPHO IP6000

Command Reference Guide

configuration be valid. If there is related configuration before, it will be covered
directly.

Moreover, after the

schedule reboot at

command is configured, and the

system time is adjusted by the

clock

command, the original schedule reboot at

parameter will become invalid.

For the related command, see

reboot, schedule reboot at, undo schedule

reboot, display schedule reboot.

Example

Configure the router to be restarted after 88 minutes (the current time is 21:32).

<NEC-PHILIPS>

schedule reboot delay 88

Reboot scheduled for 23:00:00 UTC 2002/11/1 (in 1 hours and 28 minutes)
Proceed with reboot? [Y/N]:y

upgrade

Syntax
upgrade [ bootrom | pico-code] filename

View

System view

Parameter
bootrom

: Upgrades the BootROM on line .

pico-code

: Upgrades the pico-code on line.

filename

: The file name of the upgrade software package to be used.

Description

Using the

upgrade

command, you can upgrade the

BootRom

program,

pico-

code

or the

logic

Example

Upgrade the

pico-code

on line, given the file name of the upgrade software

package is filename.

[NEC-PHILIPS]

upgrade pico-code filename

undo schedule reboot

Syntax
undo schedule reboot

View

User view

Parameter

None

Description

Using the

undo schedule reboot

command, you can cancel the parameter

configuration of the schedule reboot terminal service.

For the related command, see

reboot, schedule reboot at, schedule reboot

delay, display schedule reboot.

Example

Cancel the timing reboot router function.

<NEC-PHILIPS>

undo schedule reboot

Summary of Contents for SOPHO IP 5000
































































































































































































Search results

Summary of Contents for SOPHO IP 5000

Reviews:

Brands by name

Popular brands

NEC SOPHO IP 5000, Command Reference Manual

Search results

Summary of Contents for SOPHO IP 5000

Reviews:

Brands by name

Popular brands