manualshive.com logo in svg

NEC SOPHO IP 5000, Command Reference Manual

The NEC SOPHO IP 5000 is a state-of-the-art communication system designed to streamline your business communication. To unleash the full potential of this product, download the Command Reference Manual from our website absolutely free. Explore in-depth functionalities and optimize your experience with this comprehensive manual.

Share
Download
background image

 

 

SOPHO 

IP 5000/SOPHO IP6000 

 

Command Reference Guide 

 

129

 

Example  

Set the asynchronous serial interface to work in flow mode.  
 
[NEC-PHILIPS-Serial0/0/0]

async mode flow  

 
 

baudrate  

Syntax  
baudrate baudrate  
 
View  

Serial interface view  
 

Parameter  
baudrate

: Baud rate of serial interface in bps. It is in the range of 300 to 115200  

for an asynchronous serial interface and 1200 to 2048000 for a synchronous 
serial  interface.  
 

Description  

Using the 

baudrate

 command, you can set the baud rate for a serial interface.  

 
By default, the baud rate is 9600 bps on the asynchronous serial interface and  
64000 bps on a synchronous serial interface.  
 
Following are the baud rates available for the asynchronous serial interface.  

 300 bps, 600 bps, 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,  
38400 bps, 57600 bps, 115200 bps.  

 
Following are the baud rates available for the synchronous serial interface.  

 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600  
bps, 64000 bps, 72000 bps, 115200 bps, 128000 bps, 384000 bps,  
2048000 bps.  

 
The baud rate range available for the synchronous serial interface depends on 
the  applied physical electric specifications.  

 V.24 DTE/DCE supports the range of 1200 bps to 64000 bps  
 V.35 DCE/DCE, X.21 DTE/DCE, EIA/TIA-449 DTE/DCE and EIA-530 
DTE/DCE  supports the range of 1200 bps to 2048000 bps  

 
After a synchronous/asynchronous serial interface makes the synchronous/ 
asynchronous switchover, the baud rate of the interface will resume the default  
baud rate in the new operating mode.  
 
When setting baud rate for a serial interface, you should take into consideration  
the elements, such as operating mode (synchronous/asynchronous mode) and 
the  electric specifications of the connected external cable. In addition, you 
should note  that the baud rate of asynchronous serial interface is only 
significant for the  connection between router and modem. If two modems are 
concerned, they will  negotiate the baud rate between them. Therefore, different 
baud rate settings can  be set on the routers at the two ends of a connection, if 
the routers are working in  asynchronous mode. In synchronous mode, 
however, the router working as DCE  will determine the baud rate for the line 
transmission. Therefore, you must set  baud rate at the DCE side.  
 

Example  

Set the baudrate of the asynchronous serial interface to 115200bps.  
 
[NEC-PHILIPS-Serial0/0/0]

baudrate 115200  

 

Summary of Contents for SOPHO IP 5000
































































































































































































Reviews:

No comments

Related manuals for SOPHO IP 5000

Barracuda Networks Network Quick Start Manual preview
Network
Brand: Barracuda Networks Pages: 2
National Instruments NI 9219 Operating Instructions Manual preview
NI 9219
Brand: National Instruments Pages: 36
QTech QSR-3920 Series Configuration Manual preview
QSR-3920 Series
Brand: QTech Pages: 120
ZyXEL Communications ZyXEL EES-1024AF User Manual preview
ZyXEL EES-1024AF
Brand: ZyXEL Communications Pages: 99
Supero 6027R-E1R12N User Manual preview
6027R-E1R12N
Brand: Supero Pages: 112
Vaisala TERMBOX-1200 User Manual preview
TERMBOX-1200
Brand: Vaisala Pages: 32
Watchguard XTM 850 Hardware Manual preview
XTM 850
Brand: Watchguard Pages: 30
TRENDnet TE100-S16 - 10/100Mbps Ethernet Switch User Manual preview
TE100-S16 - 10/100Mbps Ethernet Switch
Brand: TRENDnet Pages: 15
TP-Link TL-MR3220 Quick Installation Manual preview
TL-MR3220
Brand: TP-Link Pages: 87
JUMO 705041 Installation Instructions Manual preview
705041
Brand: JUMO Pages: 60
ANTAIRA LMP-1202G-SFP Series Hardware Manual preview
LMP-1202G-SFP Series
Brand: ANTAIRA Pages: 19
Alarm NX-208E Installation Manual preview
NX-208E
Brand: Alarm Pages: 5
Genexis FiberTwist G6426 Installation Manual preview
FiberTwist G6426
Brand: Genexis Pages: 9
TP-Link TL-SL2226P+ User Manual preview
TL-SL2226P+
Brand: TP-Link Pages: 37
Patton electronics ipRocketLink 3086FR Quick Start Manual preview
ipRocketLink 3086FR
Brand: Patton electronics Pages: 12
Paradyne JetFusion 2100 Series User Manual preview
JetFusion 2100 Series
Brand: Paradyne Pages: 296
Concept Pro DEEP LEARNING PLUS Quick Start Manual preview
DEEP LEARNING PLUS
Brand: Concept Pro Pages: 28
H3C SecPath F1070 Manual preview
SecPath F1070
Brand: H3C Pages: 68

Brands by name

Popular brands

Load more brands