manualshive.com logo in svg

NEC SOPHO IP 5000, Command Reference Manual, Page: 85 / 191

Share
Download
NEC SOPHO IP 5000 Command Reference Manual Download Page 85

 

 

SOPHO 

IP 5000/SOPHO IP6000 

 

Command Reference Guide 

 

85

 

information of each NTP time server from the local device tracing to the 
reference clock source.  

 

This command is used to trace to the reference clock source from the local 
device along the time synchronous NTP server chain and display the summary 
information of each NTP server.  
 

Example 

 

<NEC-PHILIPS> 

display ntp-service trace  

server4: stratum 4, offset 0.0019529, synch distance 0.144135  
server3: stratum 3, offset 0.0124263, synch distance 0.115784  
server2: stratum 2, offset 0.0019298, synch distance 0.011993  
server1: stratum 1, offset 0.0019298, synch distance 0.011993 refid  'GPS 
Reciever'  
 
The above information displays the synchronous chain of server4. It indicates 
that server 4 can be synchronized to server 3, server 3 to server 2 and server 2 
to server 1.  
Server 1 is synchronized from the reference clock source GPS Receiver.  

 
 

ntp-service access  

Syntax  
ntp-service access { query | synchronization | server | peer } acl-number 

 

undo ntp-service access { query | synchronization | server | peer }  

 

View 

 

System view  

 

Parameter  

 

query

: Query authority is limited.  

 

synchronization

: Only the server is permitted to access.  

 

server

: Allows the server to perform access and query.  

 

peer

: Absolute access.  

 

acl-number

: IP address access list number in the range of 1 to 99.  

 

Description 

 

Using the 

ntp-service access

 command, you can set the access control 

authority of the local device services. Using the 

undo ntp-service access

 

command, you can remove the access control authority that has been set.  

 

By default, there is no access authority.  

 

This command is used to set the access authority of the NTP service of the 
local device. A security approach of minimum authority is provided in this 
manual. The more secure approach is to perform ID authentication. When there 
is an access request, this command can be used to make the matches in 
sequence from minimum access authority to the maximum authority. All 
matches are based on the first match. The match order is peer, server, 
synchronization, query.  

 

Example

 

 Enable the peer in No.76 access list to perform time request, query control and 
time synchronization on the local device.  

 

[NEC-PHILIPS] 

ntp-service access peer 76 

 

 

Summary of Contents for SOPHO IP 5000
































































































































































































Reviews:

No comments