NEC NEFAX - 691 B/W Laser User Manual Download Page 80

Page: 80 / 340

4.3 Specifying the Zoom Ratio

4-9

Chap

ter

4.3

Specifying the Zoom Ratio

By specifying a zoom ratio, the copy can be enlarged or reduced.

Zoom Ratio Settings

Note

LT: Letter

HL: Half Letter

LG: Legal

Zoom Ratio Settings

Description

Fixed ratios

• The following optimum zoom ratios are available for making copies

from commonly used original sizes to standard paper sizes.

•

0.50

•

0.64 (LT

→

HL)

•

0.78 (LG

→

LT)

•

1.29 (HL

→

LT)

•

1.54 (HL

→

LG)

•

2.00

Ratios set using the Zoom [

▼

]

and [

▲

] keys

Pressing the [

▼

] or [

▲

] key increases or decreases the zoom ratio in

0.01 increments.

The ratio can range from

0.50 to

2.00.

Full Size

This setting makes a copy the same size as the original (

1.00).

Summary of Contents for NEFAX - 691 B/W Laser





















































































































































































































































































































































Search results

Summary of Contents for NEFAX - 691 B/W Laser

Reviews:

Related manuals for NEFAX - 691 B/W Laser

Brands by name

Popular brands

NEC NEFAX - 691 B/W Laser, User Manual

Search results

Summary of Contents for NEFAX - 691 B/W Laser

Reviews:

Related manuals for NEFAX - 691 B/W Laser

Brands by name

Popular brands