NEC NEFAX - 691 B/W Laser User Manual Download Page 295

Page: 295 / 340

9.2 Getting Ready

9-50

Int

net F

x &

twor

th NE

)

apte

r 9

Specifying the Settings for Group Dialing

From the page displayed by clicking “Group Dial Setting” in the menu on
the “Fax” tab, group dial settings for the copier can be specified.

Adding a New Group Dial Setting

Start up Power Web Management Utility.

Refer to

“Using Power Web Management Utility” on page 9-10

Click “Group Dial Setting” in the menu on the “Fax” tab.

Click the group dial number where you wish to add a new address.

No.

One-touch dial number (01 to 64)

Destination Name

The group name is displayed for the one-touch dial keys
that contain groups.

Address

“(Group Dial)” is displayed for the one-touch dial keys that
contain groups.

[Delete] button

Click this button to delete the one-touch dial settings that
contain group dial information.

Summary of Contents for NEFAX - 691 B/W Laser





















































































































































































































































































































































Search results

Summary of Contents for NEFAX - 691 B/W Laser

Reviews:

Related manuals for NEFAX - 691 B/W Laser

Brands by name

Popular brands

NEC NEFAX - 691 B/W Laser, User Manual

Search results

Summary of Contents for NEFAX - 691 B/W Laser

Reviews:

Related manuals for NEFAX - 691 B/W Laser

Brands by name

Popular brands