NEC NEFAX - 691 B/W Laser User Manual Download Page 114

Page: 114 / 340

6.1 Transmission Methods

6-11

x T

ran

ion

/Rec

ept

ion

thod

Cha

ter 6

To fax using timer transmission

Position the document to be faxed.

If necessary, change the “Resolution” setting (p. 5-12).

Press the [Function] key.

Press the [2] key from the 10-Key
Pad.

Press the [Function] key twice to
select “TIMER TX”, and then press
the [Yes] key.

A screen appears, allowing you to
specify the transmission time.

Using the 10-Key Pad, enter the
desired transmission time, and
then press the [Yes] key.

If you wish to correct the time,
press the [No] key, and then
enter the correct time.

Specify the fax number of the
recipient.

Refer to

“Dialing” on page 5-2

Press the [Start] key.

The machine scans the document, then enters transmission standby mode.

NEFAX671

NEFAX691

Summary of Contents for NEFAX - 691 B/W Laser





















































































































































































































































































































































Search results

Summary of Contents for NEFAX - 691 B/W Laser

Reviews:

Related manuals for NEFAX - 691 B/W Laser

Brands by name

Popular brands

NEC NEFAX - 691 B/W Laser, User Manual

Search results

Summary of Contents for NEFAX - 691 B/W Laser

Reviews:

Related manuals for NEFAX - 691 B/W Laser

Brands by name

Popular brands