NEC NEFAX - 691 B/W Laser User Manual Download Page 133

Page: 133 / 340

7.1 Utility Mode

7-2

Usi

ng the Util

ode

apte

r 7

7.1

Utility Mode

There are fifteen menus in the Utility mode.

No.

Name

Description

MACHINE SETTING

Used to specify settings for the machine’s operating environment.

PAPER SOURCE
SETUP

Used to specify the size and type of paper loaded in Tray1. In addition,
auto tray switching can be enabled for each tray.

ADMIN.MANAGEMENT

Used to specify setting for the administrator.

COPY SETTING

Used to specify the default settings for each copy function.

FAX REGISTRATION

Used to specify the default setting for each fax function.

TX OPERATION

Used to specify the default setting for TX operation.

RX OPERATION

Used to specify the default setting for RX operation.

COMM. SETTING

Used to specify the default setting for communicating environment.

REPORTING

Used to specify the default setting for each report function.

INITIAL USER DATA
* Only for NEFAX691

Used to specify setting for the initializing user data.

NETWORK SETTING

* Only for NEFAX691

E-MAIL SETTING 1

Used to specify e-mail and scan setting.
*Only available for NEFAX691

E-MAIL SETTING 2

SCAN SETTING

Summary of Contents for NEFAX - 691 B/W Laser





















































































































































































































































































































































Search results

Summary of Contents for NEFAX - 691 B/W Laser

Reviews:

Related manuals for NEFAX - 691 B/W Laser

Brands by name

Popular brands

NEC NEFAX - 691 B/W Laser, User Manual

Search results

Summary of Contents for NEFAX - 691 B/W Laser

Reviews:

Related manuals for NEFAX - 691 B/W Laser

Brands by name

Popular brands