NEC NEFAX - 691 B/W Laser User Manual Download Page 273

Page: 273 / 340

9.2 Getting Ready

9-28

Int

net F

x &

twor

th NE

)

apte

r 9

Press the

and

keys to

select “ON” or “OFF”, and then
press the [Yes] key.
The E-MAIL SETTING 1 screen
appears again.

Specifying the Default Subject Line

From the “E-MAIL SETTING 1”
menu in the Utility mode, press the
[7] key on the 10-key pad to select
“DEFAULT SUBJECT”.

Enter text for the default subject
line.

For information on entering text,
refer to

“Entering Text” on page 3-18

Up to 20 characters can be entered for the default subject.

Press the [Yes] key.

The E-MAIL SETTING 1 screen appears again.

Specifying Other E-mail Settings (“E-MAIL SETTING 2” Menu)

The settings for the E-MAIL SETTING 2 functions are specified from the
“E-MAIL SETTING 2” menu in Utility mode.

This section describes how to specify settings for the following functions.

POP3 SERVER

POP3 PORT NO.

POP3 TIMEOUT

POP3 ACCOUNT

POP3 PASSWORD

AUTO RECEPTION

REPLY ADDRESS

HEADER PRINT

Tip

If you wish to cancel a change to a setting before applying it, press the
[No] key. Press the [Yes] key after the message “STOP SETTING?”
appears.

[ ]

Summary of Contents for NEFAX - 691 B/W Laser





















































































































































































































































































































































Search results

Summary of Contents for NEFAX - 691 B/W Laser

Reviews:

Related manuals for NEFAX - 691 B/W Laser

Brands by name

Popular brands

NEC NEFAX - 691 B/W Laser, User Manual

Search results

Summary of Contents for NEFAX - 691 B/W Laser

Reviews:

Related manuals for NEFAX - 691 B/W Laser

Brands by name

Popular brands