NEC NEFAX - 691 B/W Laser User Manual Download Page 55

Page: 55 / 340

3.8 Copy Paper

3-22

Bef

ng C

opi

ing

apte

r 3

Unsuitable Paper

The following types of paper should not be used, otherwise decreased print quality,
paper misfeeds or damage to the machine may occur.

Overhead projector transparencies that have already been fed through the
machine
Even if the transparency is still blank, do not reuse it.

Paper that has been printed on by a heat-transfer printer or an inkjet printer

Paper that is either extremely thick or extremely thin

Folded, curled, wrinkled, or torn paper

Paper that has been left unwrapped for a long period of time

Damp paper

Perforated paper or paper with punched holes

Extremely smooth or extremely rough paper, or paper with an uneven surface

Paper that has been treated, such as carbon-backed, heat-sensitive or
pressure-sensitive paper

Paper that has been decorated with foil or embossing

Paper of a non-standard shape (not rectangular)

Paper that is bound with glue, staples or paper clips

Paper with labels attached

Paper with ribbons, hooks, buttons, etc. attached

Curled or wrinkled paper

Art paper, coated paper or inkjet printer paper

Summary of Contents for NEFAX - 691 B/W Laser





















































































































































































































































































































































Search results

Summary of Contents for NEFAX - 691 B/W Laser

Reviews:

Related manuals for NEFAX - 691 B/W Laser

Brands by name

Popular brands

NEC NEFAX - 691 B/W Laser, User Manual

Search results

Summary of Contents for NEFAX - 691 B/W Laser

Reviews:

Related manuals for NEFAX - 691 B/W Laser

Brands by name

Popular brands