NEC NEFAX - 691 B/W Laser User Manual Download Page 118

Page: 118 / 340

6.1 Transmission Methods

6-15

x T

ran

ion

/Rec

ept

ion

thod

Cha

ter 6

Press the [7] key from the 10-Key
Pad.

Press the [Function] key 7 times to
select “RELAY INITIATE”, and
then press the [Yes] key.

Specify the relay station, and then
press the [Yes] key.

Refer to

“Dialing” on page 5-2

A screen appears, allowing you to
specify the relay box ID.

Using the 10-Key Pad, enter the
relay box ID.

Enter the relay box ID (20
digits or less) programmed at
the relay station.

If you wish to correct the ID, press the [No] key, and then enter the new
number.

Press the [Yes] key.

A screen appears, allowing you to specify the password.

Using the 10-Key Pad, enter the
password.

Enter the password (20 digits
or less) if a password has been
set at the relay station.

If you wish to correct the password, press the [No] key, and then enter the
new number.

Press the [Start] key to begin scanning and sending the fax.

NEFAX691

NEFAX671

Summary of Contents for NEFAX - 691 B/W Laser





















































































































































































































































































































































Search results

Summary of Contents for NEFAX - 691 B/W Laser

Reviews:

Related manuals for NEFAX - 691 B/W Laser

Brands by name

Popular brands

NEC NEFAX - 691 B/W Laser, User Manual

Search results

Summary of Contents for NEFAX - 691 B/W Laser

Reviews:

Related manuals for NEFAX - 691 B/W Laser

Brands by name

Popular brands