NEC NEFAX - 691 B/W Laser User Manual Download Page 305

Page: 305 / 340

9.3 Using Scan to E-mail Operations

9-60

Int

net F

x &

twor

th NE

)

apte

r 9

To change other settings, press the

key. (Go to Step 8.)

To quit making changes to the scan mode settings, press the
[Start] key. The screen for selecting the document mode appears.

Press the

and

keys to select

the compression encoding method
(“MH”, “MR”, or “MMR”).

Press the [Start] key to return to the Scan screen.

The document mode selection screen appears.

9.3.1.3 Changing the Scanned Image Size

The setting for the size of the scan image can be changed from the screen
for selecting the document mode.

Press the

key in the screen for

selecting the SCAN SIZE.

Press the

and

keys to select

the scan size, and then press the
[Yes] key.

The document mode selection screen appears again.

9.3.1.4 Specifying the Default Settings for the Scan Settings

The default settings for resolution, data format, and encoding method
used by the Scan to E-mail and Scan to Server (FTP) functions can be
specified.

Specifying the Resolution

Press the [Utility] key.

Press the

key until

“SCAN SETTING” appears.

Press the [1] key on the 10-key pad
to select “RESOLUTION”.

Press the

and

keys to select

the resolution (150

150 dpi,

300

300 dpi, or 600

600 dpi), and

Summary of Contents for NEFAX - 691 B/W Laser





















































































































































































































































































































































Search results

Summary of Contents for NEFAX - 691 B/W Laser

Reviews:

Related manuals for NEFAX - 691 B/W Laser

Brands by name

Popular brands

NEC NEFAX - 691 B/W Laser, User Manual

Search results

Summary of Contents for NEFAX - 691 B/W Laser

Reviews:

Related manuals for NEFAX - 691 B/W Laser

Brands by name

Popular brands