2. Bundled Software for "PC for Management"
Express5800/R320c-E4, R320c-M4, R320d-E4, R320d-M4 Installation Guide (Windows Server 2008)
177
Chapter 2 Installing Bundled Software
2.
Bundled Software for "PC for Management"
This section describes the bundled software required to configure "PC for Management" used to manage the
server system.
2.1
NEC ESMPRO Manager
NEC ESMPRO Manager remotely controls and monitors the server hardware.
To use these features, install the bundled software such as NEC ESMPRO Agent on the server.
For details about the system requirements of NEC ESMPRO Manager and how to install it, refer to "
NEC
ESMPRO Manager Installation Guide
" in EXPRESSBUILDER.
2.2
Express Report Service (MG)
To avoid system failures or to maintain the server quickly, Express Report Service (MG) informs the support
center of the failure information or preventive maintenance information by E-Mail or Modem.
To use this feature, NEC ESMPRO Agent is required because Express Report Service usually works with it.
If NEC ESMPRO Agent cannot be installed to the server, you can install Express Report Service (MG) into NEC
ESMPRO Manager instead of Express Report Service.
For details about Express Report Service (MG), refer to
"Express Report Service (MG) Installation Guide"
in
EXPRESSBUILDER.
Tips
Express Report Service through the SNMP Alert of EXPRESSSCOPE Engine 3 is not
available. Refer to
"EXPRESSSCOPE Engine 3 User's Guide"
for more information.
