NEC EcoPowerGateway N8142-36F, User Manual

Page: 83 / 136

Configuring Your EcoPowerGateway 4-13
Peripheral Configuration
IMPORTANT:
Make sure to avoid any conflict in the interrupt
requests or the base I/O addresses. If an assigned value is already used
by another resource, it appears in yellow. Any yellow value must be re-
assigned.
Option Parameter Description Your Setting
Serial Port Disabled
[Enabled] Specify whether serial port is enabled
or disabled.
Base I/O Address [3F8h]
2F8h
3E8h
2E8h Specify the base I/O address for serial
port.
Interrupt IRQ 3
[IRQ 4] Specify the interrupt request (IRQ) for
serial port.
USB 2.0 Controller Disabled
[Enabled] Specify whether the USB 2.0 controller
is enabled or disabled.
Serial ATA Disabled
[Enabled] Specify whether the onboard SATA
controller is enabled or disabled. Do
not change this item to "Disabled" in
normal operation.
SATA AHCI [Disabled]
Enabled The AHCI (Advanced Host Controller
Interface) is always disabled on this
system. This option is view only.
This menu appears only when [Serial
ATA] is enabled.
[ ]: Factory-set