NEC EcoPowerGateway N8142-36F, User Manual

Page: 92 / 136

4-22 Configuring Your EcoPowerGateway
Alert Test
Option Parameter Description Your Setting
Primary [Enter] (*1) Press Enter and select "Yes" to send
test alert to the primary destination.
Alert Status OK
NG Indicates the alert sending status
(view only).
Secondary [Enter] (*1)
Press Enter and select "Yes" to send
test alert to the secondary destination.
Alert Status OK
NG Indicates the alert sending status
(view only).
Tertiary [Enter] (*1) Press Enter and select "Yes" to send
test alert to the tertiary destination.
Alert Status OK
NG Indicates the alert sending status
(view only).
[ ]: Factory-set
* If you press Enter on the menu, the following message appears.
Alert Test
Are you sure to test alert?
If you select "Yes", it may take a few minutes
to test alert. Please wait for a while.
[Yes] No
IMPORTANT: To perform alert test, select [BMC Configuration]
submenu and change parameters for [Common] and [BMC LAN1
Configuration] appropriately. Then, select [Exit] - [Save Changes] or
[Exit Saving Changes] to reflect the setting to BMC.