NEC EcoPowerGateway N8142-36F, User Manual

Page: 33 / 136

Notes on Using Your EcoPowerGateway 1-17
FOR PROPER OPERATION
Observe the following notes for successful operation of the EcoPowerGateway. Use of the
EcoPowerGateway ignoring the notes will cause malfunctions or failures of the EcoPowerGateway.
EcoPowerGateway
„
Mount the EcoPowerGateway on a rack which can accept the EcoPowerGateway.
„
The socket-outlet shall be installed near the EcoPowerGateway and shall be easily
accessible.
„
Clear the dust adhering to the external surfaces of the EcoPowerGateway and the
ventilation hole of the power unit periodically. (See Chapter 5 for details.) Regular
cleaning proactively prevents various failures of the unit.
„
Always use the power cable dedicated to EcoPowerGateway to connect with the target
device.
„
Before connecting/disconnecting the cable to/from the peripherals, be sure to turn off the
POWER switch of the EcoPowerGateway.
„
Before turning off the power of EcoPowerGateway, make sure that all the devices
connected with the EcoPowerGateway are powered off.
„
After turning off the EcoPowerGateway and Maintenance card, wait for at least 30
seconds before turning on.
„
When you connect the target device with the EcoPowerGateway, wait for 30 seconds or
longer before turning on the DC output switch.
„
After disconnecting the power cable from the connector, wait for at least 30 seconds
before connecting it again.
„
Before relocating the EcoPowerGateway, turn off the power, and disconnect the power
cable from the connector.
„
Check and adjust the system clock before the operation if any of the following conditions
is applicable.
– After carriage of the EcoPowerGateway
– After storage of the EcoPowerGateway
– After the device is entered into the pause state under the environmental condition
enduring device operation (temperature: 10 to 40°C, humidity: 20 to 80%)
„
Check the system clock at the rough rate of once per month.
When the system clock is installed in a system requiring high time precision, it is
recommended to use a time server (NTP server).
If the system clock is remarkably delayed or advanced as the passage of time in spite of
adjustment, contact your service representative to ask maintenance.