NEC EcoPowerGateway N8142-36F, User Manual

Page: 113 / 136

Troubleshooting 6-7
On-screen error message Recommended action
0B82 BMC Core hardware failed. 1. Press the POWER switch of EcoPowerGateway to turn
off the power, then turn it on.
2. If the same error persists, contact your service
representative.
0B83 BMC IBF or OBF check
failed. 1. Take one of the following measures to reboot (reset)
the maintenance card.
* Press
Ctrl + Alt + Del .
* Issue a command from Web browser of
EXPRESSSCOPE Engine 2 or NEC ESMPRO
Manager.
2. Take one of the following measures to power off the
maintenance card and then on.
* Press the Maintenance switch to power off the
maintenance card, then press it again to power on.
* Issue a command from Web browser of
EXPRESSSCOPE Engine 2 or NEC ESMPRO
Manager.
3. If the same error persists, contact your service
representative.
0B8A BMC SEL area full 1. Run BIOS SETUP, select [Server] - [Event Log
Configuration] - [Clear All Error Logs] to clear the IPMI
system event logs.
2. If the same error persists, contact your service
representative.
Note: You can make a backup copy of IPMI system event
logs through the Off-line Maintenance Utility before
clearing the IPMI system event logs on BIOS
SETUP.