NEC EcoPowerGateway N8142-36F, User Manual

Page: 25 / 136

Notes on Using Your EcoPowerGateway 1-9
CAUTION
Plug in to a proper power source.
Use a proper wall outlet of the specified voltage equipped with the ground
line. Use of an improper power source may cause a fire or a power leak.
Do not install the EcoPowerGateway where you need an extension cord.
Use of a cord that does not meet the power specifications of the
EcoPowerGateway may heat up the cord and cause a fire.
The power consumption per one power unit is described in the label sticked
on the power unit. Use the power cord appropriate to the power unit.
Do not connect the power cord to an outlet that has an illegal number of
connections.
The electric current exceeding the rated flow overheats the outlet, which may
cause a fire.
Insert the power plug into the outlet as far as it goes.
Heat generation resulting from a halfway inserted power plug (imperfect
contact) may cause a fire. Heat will also be generated if condensation is
formed on dusty blades of the halfway inserted plug, increasing the possibility
of fire.
Use the authorized power cord only.
Use only the power cord that comes with your EcoPowerGateway. Use of an
unauthorized power cord may cause a fire when the electric current exceeds
the rated flow.
Also, observe the following to prevent an electric shock or fire caused by a
damaged cord.
„
Do not stretch the cord harness.
„
Do not pinch the power cord.
„
Do not bend the power cord.
„
Keep chemicals away from the
power cord.
„
Do not twist the power cord.
„
Do not place any object on the
power cord.
„
Do not bundle power cords.
„
Do not alter, modify, or repair the
power cord.
„
Do not secure the power cord with
staples or equivalents.
„
Do not use any damaged power
cord. (Replace a damaged power
cord with a new one of the same
specifications. Ask your service
representative for replacement.)
Do not use the attached power cord for any other devices or usage.
The power cord that comes with your EcoPowerGateway is designed aiming
to connect with this EcoPowerGateway and to use with the
EcoPowerGateway, and its safety has been tested. Do not use the attached
power cord for any other purpose. Doing so may cause a fire or an electric
shock.