NEC Dterm PSIII, User Manual

Page: 42 / 74

3-28 Using the PSIII
Dterm PSIII User Guide - Revision 1
Figure 3-30 Digits dialog box
Step 7
Enter up to 40 numbers to dial or access codes to initiate.
Step 8
Press the FNC key to enter.
Step 9
Press the FNC key again to confirm.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Reset Soft Keys
Step 1
Press FNC+3+2 and then select [2] Reset . A Soft Key Reset dialog box
displays (Figure 3-31) .
Figure 3-31 Soft Key Reset dialog box
Step 2
Press the FNC key or 2 . A Soft Key Selection dialog box displays
(Figure 3-32) .
Figure 3-32 Soft Key Selection dialog box
Step 3
Use the Scroll T or Scroll S keys to search the number and name of
the soft key to erase.
Step 4
Select the soft key to erase and then press the FNC key.
Step 5
Press the FNC key to confirm or END/PWR to cancel.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
Digits?
Soft Key
[1]Set
[2]Reset
Soft Key
[1]PICK
[2]PARK
[3]CAMP