NEC Dterm PSIII User Manual Download Page 17

Page: 17 / 74

Using the PSIII 3-3

Dterm PSIII User Guide - Revision 1

About the Battery

The PSIII has a new design which includes a gold-plated flex circuit on

both the PSIII handset and the PSIII battery allowing for easy removal

of the battery.
One of the flex circuits envelopes the battery itself, providing a gold-

plate for connection as well as a separate fuse to ensure the battery will

not overheat. The second flex circuit is within the handset so when the

battery is placed into the bottom of the handset, the battery connection

is complete.
The battery icon on the Dterm PSIII displays a solid battery when the

charge is strong. When the battery icon diminishes, recharge the

battery as indicated below.

Battery Charger Options

The PSIII product now has two options for charging the batteries. A

Dterm PSIII Charger with an AC Adapter and a Multi-battery Charger.
The Dterm PSIII Charger with AC adapter allows users to charge the

PSIII handset and battery together as a complete unit. Once fully

charged, the PSIII battery will last for over 300 hours of standby time.
The new external Multi-battery Charger supports charging up to six

batteries with a single AC outlet. This option provides a shared resource

for charging up to six batteries simultaneously.

To Charge the Battery Using the Dterm PSIII Charger with AC Adapter

Step 1

Place the PSIII on the battery charger with the battery pack inside the
handset

(Figure 3-2)

Summary of Contents for Dterm PSIII











































































Search results

Summary of Contents for Dterm PSIII

Reviews:

Related manuals for Dterm PSIII

Brands by name

Popular brands

NEC Dterm PSIII, User Manual

Search results

Summary of Contents for Dterm PSIII

Reviews:

Related manuals for Dterm PSIII

Brands by name

Popular brands