![background image](http://html.mh-extra.com/html/nec/dterm-psiii/dterm-psiii_user-manual_248445046.webp)
3-32 Using the PSIII
Dterm PSIII User Guide - Revision 1
Figure 3-38
Ring Volume Control dialog box
Step 3
Do one of the following to control the ring volume:
—To turn off the ring, press the
Scroll
W
key two times. Press the
FNC
key or wait five seconds.
—To turn up the ring volume, press the
Scroll
X
key.
—To turn down ring volume, press the
Scroll
W
key.
Speaker Ring
The Speaker Ring option is for Mode 2* Systems Only.
This feature allows you to disable an incoming call from ringing while
you are on a call.
Step 1
To disable the speaker ring, press
FNC+3+4
. A Ring Options dialog box
displays
(Figure 3-37)
.
Step 2
Select
[2] Speaker Ring
and then press the
FNC
key or
2
.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
Ring Volume
Standard
NOTE
*Mode 2 features are only available on NEAX 2000 IVS Series 1900 software or
NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00 software or
later.
NOTE
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
Summary of Contents for Dterm PSIII
