NEC Dterm PSIII, User Manual

Page: 32 / 74

3-18 Using the PSIII
Dterm PSIII User Guide - Revision 1
Example:
Press the “2” key once for “A,” twice for “B,” three times for
“C” and four times for the number “2.” Press the SHIFT key to
shift to lower case mode.
Step 4
When the name is complete, press the FNC key. An Add Digits dialog
box displays (Figure 3-14) .
Figure 3-14 Add Digits dialog box
Step 5
Type in the desired number. If a pause is required (for example, after
entering
9 to gain access to an outside line), press HOLD to insert a
pause.
Step 6
Press the FNC key to enter.
Step 7
Press the FNC key again to confirm.
After the registration is complete, a setting tone will ring. After two
seconds, the Directory Menu page will redisplay.
To Edit a Directory Entry
Step 1
Press FNC+1+1 . A Directory dialog box displays (Figure 3-13).
Step 2
Select [2] Edit and then press the FNC key or 1.
Step 3
Press the Scroll
T
key to search the Directory in alphabetical order.
Press the Scroll
S
key to search in reverse order.
Step 4
Press the FNC key to select the entry to edit.
Step 5
To edit the name, press the Scroll X key or Scroll W key to highlight the
letter.
Step 6
Press CLEAR to delete the letters or place the cursor at the desired
location and enter additional letters.
Step 7
To edit the telephone number press the Scroll
T
key.
Step 8
Press CLEAR to delete the numbers. Type additional numbers to
change the entry.
Step 9
Press the FNC key twice to confirm the change, or press END/PWR to
cancel.
Add Digits?
NOTE
Do not remove the battery for at least one minute after entering a Directory or Speed
Dial entry.