![background image](http://html.mh-extra.com/html/nec/dterm-psiii/dterm-psiii_user-manual_248445051.webp)
Using the PSIII 3-37
Dterm PSIII User Guide - Revision 1
To Set Call Forwarding - Don’t Answer Access Code
Step 1
Press
FNC+3+5+2
. A Call Forwarding - Don’t Answer dialog box
displays
(Figure 3-45)
.
Figure 3-45
Call Forwarding - Don’t Answer dialog box
Step 2
Press the
FNC
key or
1
. For Mode 2* systems, a Call Forwarding - Don’t
Answer Access Code dialog box displays
(Figure 3-46)
.
Figure 3-46
Call Forwarding - Don’t Answer Access Code dialog box
Step 3
Type in the access code to establish call forwarding when a call is not
answered.
Example:
*4=Call Forwarding - Don’t Answer, Set.
Step 4
Press the
FNC
key to enter.
Step 5
Press the
FNC
key to confirm.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Cancel Call Forwarding - Don’t Answer
Step 6
Press
FNC+3+5+2
. A Call Forwarding - Don’t Answer dialog box
displays
(Figure 3-45)
.
Step 7
Press the
FNC
key or
2
. For Mode 2* systems, a Set Call Forwarding -
Don’t Answer Access Code dialog box displays
(Figure 3-46)
.
Step 8
Type in the access code to cancel Call Forwarding - Don’t Answer.
Example:
#4=Call Forwarding - Don’t Answer, Cancel.
[1]Set
[2]Reset
CFW D/A
Access No?
NOTE
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
Summary of Contents for Dterm PSIII
