Using the PSIII 3-39
Dterm PSIII User Guide - Revision 1
Step 4
Press the
FNC
key to enter.
Step 5
Press the
FNC
key to confirm.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Cancel Call Forwarding - All Calls
Step 6
Press
FNC+3+5+3
. A Call Forwarding - All Calls dialog box displays
(Figure 3-45)
.
Step 7
Press the
FNC
key or
2
. For Mode 2* systems, a Call Forwarding - All
Calls Access Code dialog box displays
(Figure 3-48)
.
Step 8
Type in the access code to cancel Call Forwarding All Calls.
Example:
#2=Call Forwarding - All Calls, Cancel.
Step 9
Press the
FNC
key to enter.
Step 10
Press the
FNC
key to confirm.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
Call Forwarding - No Response
This feature is used to set the access code to establish call forwarding
when the PSIII is not within the wireless system service area or is
turned off.
To Set the Call Forwarding - No Response Access Code
Step 1
Press
FNC+3+5+4
. A Call Forwarding - No Response Access Code
dialog box displays
(Figure 3-49)
.
Figure 3-49
Call Forwarding - No Response Access Code dialog box
Step 2
Press the
FNC
key or
1
.
NOTE
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
NOTE
Check with your system administrator for the list of access codes.
[1]Set
[2]Reset
CFW N/R
Summary of Contents for Dterm PSIII
