![background image](http://html.mh-extra.com/html/nec/dterm-psiii/dterm-psiii_user-manual_248445021.webp)
Using the PSIII 3-7
Dterm PSIII User Guide - Revision 1
To Receive a Call
When you receive a call on your Dterm PSIII, the LED Ring Indicator will
flash
(Figure 3-1)
.
Step 1
Press the
L1
or
L2
* key (the line receiving the call).
Step 2
Begin speaking into the microphone.
To Use Directory Dialing
You can use Directory Dialing by searching for directory entries
manually or by name.
To Search for Directory Entries Manually
Step 1
While in a standby state, press the
Scroll
S
key. A Directory dialog box
displays
(Figure 3-8)
.
Figure 3-8
Directory dialog box
Step 2
Press the
Scroll
T
key to search the Directory in alphabetical order or
press the
Scroll
S
key to search in reverse order.
Step 3
When you locate the desired name, press
L1
or
L2
* to dial the number.
To Search the Directory by Name
Step 1
While in a standby state, press the
Scroll
S
key. A Directory dialog box
displays
(Figure 3-8)
.
NOTE
If the Calling Party Number is not available, “CALL” is displayed. If Calling Party
Name is not available then the calling party number will appear in the display (only
for Mode 2* systems).
NOTE
If you cannot answer a call,
Missed Call
is displayed.
Directory
NOTE
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
Summary of Contents for Dterm PSIII
