![background image](http://html.mh-extra.com/html/nec/dterm-psiii/dterm-psiii_user-manual_248445025.webp)
Using the PSIII 3-11
Dterm PSIII User Guide - Revision 1
To Use Courtesy Mode
Courtesy mode enables an incoming call to vibrate rather than ring.
Step 1
To enable Courtesy Mode, press
CLEAR
and hold it down for more than
two seconds. A Courtesy Mode screen displays for Mode 2* systems.
Figure 3-12
Courtesy Mode screen
Step 2
To disable Courtesy Mode, press
CLEAR
and hold it down for more than
two seconds.
Keypad Lock
Keypad Lock allows you to carry your PSIII without inadvertently
activating the phone.
Step 1
To lock the keypad, press
HOLD
for more than two seconds. A key icon
displays on the PSIII.
Step 2
To unlock the Keypad, press
HOLD
for more than two seconds.
No Service
If
No Service
is displayed on your PSIII, it is out of the service area.
The PSIII cannot be used until it is within your wireless coverage area. A
No Service indication may also indicate that the number of visitors limit
has been exceeded when roaming.
Step 1
To remove the
No Service
display, turn your PSIII off by pressing the
END/PWR
key and holding for more than two seconds.
J. KRAUSER
L2:90000
L1:12345
NOTE
If DEFAULT SET or RESET ALL is used, Courtesy Mode will be disabled.
NOTE
After locking the keypad, you can still receive incoming calls.
Summary of Contents for Dterm PSIII
