![background image](http://html.mh-extra.com/html/nec/dterm-psiii/dterm-psiii_user-manual_248445054.webp)
3-40 Using the PSIII
Dterm PSIII User Guide - Revision 1
For Mode 2* systems, a Call Forwarding - No Response Access No?
dialog box displays
(Figure 3-50)
.
Figure 3-50
Call Forwarding - No Response Access No? dialog box
Step 3
Type in the access code to establish Call Forwarding - No Response.
Example:
*9=Call Forwarding - No Response, Set.
Step 4
Press the
FNC
key to enter.
Step 5
Press the
FNC
key to confirm.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Cancel Call Forwarding - No Response
Step 6
Press
FNC+3+5+4
. A Call Forwarding - No Response Access Code
dialog box displays
(Figure 3-49)
.
Step 7
Press the
FNC
key or
2
.
For Mode 2* systems, a Call Forwarding - No Response Access No?
dialog box displays
(Figure 3-50)
.
Step 8
Type in the access code to cancel Call Forwarding - No Response.
Example:
#9=Call Forwarding - No Response, Cancel.
Step 9
Press the
FNC
key to enter.
Step 10
Press the
FNC
key to confirm.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
Access No?
NOTE
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
Summary of Contents for Dterm PSIII
