NEC Dterm PSIII, User Manual

Page: 64 / 74

3-50 Using the PSIII
Dterm PSIII User Guide - Revision 1
To Turn On Directory Protection
Step 1
Press FNC+3+7+5 . A Protect DIR dialog box displays (Figure 3-70) .
Figure 3-70 Protect DIR dialog box
Step 2
Press the FNC key or 1 . For Mode 2* systems, a Password Prompt
dialog box displays (Figure 3-71) .
Figure 3-71 Password Prompt dialog box
Step 3
Type in the password and then press the FNC key to confirm. A
confirmation screen displays.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Turn Off Protect Directory
Step 1
Press FNC+3+7+5 . A Protect DIR dialog box displays (Figure 3-70) .
Step 2
Press the FNC key or 2 . For Mode 2* systems, a Password Prompt
dialog box displays (Figure 3-71) .
Step 3
Type in the password and then press the FNC key to confirm. A Protect
DIR confirmation screen displays.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
[1]On
[2]Off
Protect DIR
Password?
NOTE
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
NOTE
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.