![background image](http://html.mh-extra.com/html/nec/dterm-psiii/dterm-psiii_user-manual_248445024.webp)
3-10 Using the PSIII
Dterm PSIII User Guide - Revision 1
Figure 3-11
CPN Empty dialog box
To Transfer a Call
Step 1
To transfer a call while you are speaking on the phone, do the following.
—Press
TRF
. A special dial tone will sound.
—Enter the telephone number you wish to transfer the call to.
—Press
END/PWR
to complete the transfer. Your PSIII will return to the
standby state.
To Place a Call On Hold
Step 1
While you are speaking on the phone, press
Hold
. The call is placed on
hold.
Step 2
Press
L1
or
L2
* again to retrieve the call from hold.
NOTE
If you receive a call from the same number that has already been stored, all numbers
will be stored and the number that called you last will display.
CPN Empty
NOTE
If Calling Party Name is not available, then the calling party number will appear in the
display (only for Mode 2* systems).
NOTE
Available on Mode 2* Systems only.
Summary of Contents for Dterm PSIII
