![background image](http://html.mh-extra.com/html/nec/dterm-psiii/dterm-psiii_user-manual_248445048.webp)
3-34 Using the PSIII
Dterm PSIII User Guide - Revision 1
Trunk Ring
This feature allows you to assign an incoming call ring pattern. The ring
patterns can differ for an internal incoming call or an external incoming
call.
Step 1
To change the Trunk Ring pattern, press
FNC+3+4+4
. A Trunk Ring
Pattern dialog box displays
(Figure 3-41)
.
Figure 3-41
Trunk Ring Pattern dialog box
Step 2
Select
L1
or
L2
* by using the
Scroll
S
or
Scroll
T
keys. For Mode 2*
systems, a Trunk Ring Options dialog box displays
(Figure 3-42)
.
Figure 3-42
Trunk Ring Options dialog box
Step 3
Press the
Scroll
W
or
Scroll
X
keys, or the number key to select a
different Trunk Ring pattern.
Step 4
Press the
FNC
key to confirm.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
[1]L1
[2]L2
Trunk Ring
1 2 3 4 5 6 7 8
Trunk Ring
NOTE
The default Trunk Ring pattern is 2.
NOTE
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
Summary of Contents for Dterm PSIII
