![background image](http://html.mh-extra.com/html/nec/dterm-psiii/dterm-psiii_user-manual_248445052.webp)
3-38 Using the PSIII
Dterm PSIII User Guide - Revision 1
Step 9
Press the
FNC
key to enter.
Step 10
Press the
FNC
key to confirm.
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
Call Forwarding - All Calls
This feature allows you to set the access code to establish call
forwarding on all calls.
To Set the Call Forwarding - All Calls Access Code
Step 1
Press
FNC+3+5+3
. A Call Forwarding - All Calls dialog box displays
(Figure 3-47)
.
Figure 3-47
Call Forwarding - All Calls dialog box
Step 2
Press the
FNC
key or
1
. For Mode 2* systems, a Call Forwarding - All
Calls Access Code dialog box displays
(Figure 3-48)
.
Figure 3-48
Call Forwarding - All Calls Access Code dialog box
Step 3
Type in the access code to establish Call Forwarding - All Calls.
Example:
*2=Call Forwarding - All, Set.
NOTE
Check with your system administrator for the list of access codes.
[1]Set
[2]Reset
CFW ALL
NOTE
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
Access No?
Summary of Contents for Dterm PSIII
