![background image](http://html.mh-extra.com/html/nec/dterm-psiii/dterm-psiii_user-manual_248445036.webp)
3-22 Using the PSIII
Dterm PSIII User Guide - Revision 1
Figure 3-21
Delete Message dialog box
Step 6
Select
[1] Delete
and then press the
FNC
key or
1
.
To Adjust Call Volume
The Call Volume can be adjusted while you are speaking on the phone,
or while in a standby state.
Step 1
Press the
Scroll
W
key to lower the call volume, or the
Scroll
X
key to
increase the call volume when you are on the phone.
Step 2
While in a standby state, press
FNC+3+1+1
.
To Use Incoming Call Vibration Notification
Step 1
To enable Incoming Call Vibration Notification, press
FNC+3+1+2
. An
Incoming Call Vibration Notification dialog box displays
(Figure 3-22)
.
Figure 3-22
Incoming Call Vibration Notification dialog box
Step 2
Select
[1]On
and then press the
FNC
key or
1
.
After two seconds, a ‘
V
’ will appear on the LCD indicating Incoming Call
Vibration Notification is enabled.
There is the gro
[1]Delete
[2]List
H#01 Jan/21 17:00
NOTE
Incoming Call Vibration Notification is not active when L1 or L2* is busy.
Vibration
[1]On
[2]Off
NOTE
*
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
Summary of Contents for Dterm PSIII
