Quick Reference Guide
Yealink T42G & T42S Phones
Green Platform
Advanced Call Handling
Blind Transfer (Unannounced)
Blind transfers pass through the caller ID of the originating caller to the third party.
• Press the Tran soft key to place the first call on hold
• Input the destination extension or phone number
• Press the Tran soft key to complete the transfer
Transfer directly to an internal voicemail box by dialing 7 plus the extension as the destination number
Announced Transfer
• Press the Tran soft key to place the first call on hold
• Input the destination extension or phone number. Remain on the line while the second
call connects.
• To complete the transfer after speaking with the third party, hang up or press
the Tran soft key.
• To cancel the transfer and go back to the first party, press the Cancel or
EndCall soft key. Your first call will still be on hold.
2700 Oregon Road • Northwood, OH 43619 | 1645 West Chester Pike • West Chester, PA 19382 • 1.888.808.6111 | www.telesystem.us
5.11.18
Available features may vary. Particular feature set is based on the original order and the system
administrator’s requests for each deployment. Please contact your system administrator or
Telesystem directly to discuss any additions to the system.
Call Handling Basics
Answer a call
Lift the handset then begin speaking to the caller.
Place a call
Lift the handset then enter the phone number, extension, or code you wish to dial. Press
Send to initiate the call or wait for it to go through.
End a call
Hang up the handset or press the End Call soft key.
Mute
Press the mute button to mute your audio while on a call. Press again to disengage.
Speaker
Press the speaker button to use speaker audio mode.
Headset
Press the headset button to use headset mode audio (must have a headset attached).
Volume
Press the volume buttons to adjust volume for your ringer when idle or audio
mode while on a live call.
Hold
Press the Hold soft key to place an active call on hold.
To resume a call,
• When only one is on hold, press the Resume soft key.
• When there is more than one on hold, use the and buttons to select the
desired call then press the Resume soft key.
