NEC 900i Installation And User Manual Download Page 55

Page: 55 / 134

Onyx VSi System

Voice Prompting Messages

2-37

2. Features

Voice Prompt

Description

All lines are busy. For

Plays when trying to place a call

automatic Callback, please

when all lines in the group are busy.

press the Callback key.

Audio file is full.

Plays when trying to record a Personal
Greeting when all memory has been
used.

Please do not disturb.

Plays when calling an extension in DND

Please hold on, all lines are

Plays when calling a busy UCD or ACD

busy. Your call will be

hunt group.

answered when a line
becomes free.

Please hold on, your

Plays when calling an extension that is

call is being rerouted.

Call Forwarded off-premise.

Please start recording.

Plays to prompt the user to record a
Personal Greeting.

Recording finished.

Plays to alert the user that the time
allotted for recording a Personal
Greeting is up. Also plays when the
user has paused too long while recording
a Personal Greeting.

The lowest cost line is busy.

Plays when placing an ARS call

Please wait for the next one.

when all lines in a line group are busy.

The number you have dialed

Plays when calling a valid, but

is not in service.

inoperative extension.

Your call cannot go through.

Plays when trying to place a restricted

Please call the operator.

call.

Your calls have been

Plays to alert the user that the

forwarded.

extension’s calls have been forwarded
(controlled by system programming).

Vacant Number.

Plays when calling an invalid (not
installed) extension.

900ib.qxd 3/26/01 8:52 AM Page 37

Summary of Contents for 900i







































































































































Search results

Summary of Contents for 900i

Reviews:

Related manuals for 900i

Brands by name

Popular brands

NEC 900i, Installation And User Manual

Search results

Summary of Contents for 900i

Reviews:

Related manuals for 900i

Brands by name

Popular brands