NEC 900i Installation And User Manual Download Page 10

Page: 10 / 134

1. Installation

1-8

Installation

Before using your phone, be sure to raise the antenna to the vertical position.

Attaching the Belt Clip to the Handset

You can use the Belt Clip to attach the handset to your belt or pocket for con-
venient portability.

Remove the cover on the back of the handset near the antenna.

Slide the Belt Clip into the opening. Push
until it snaps into place.

To remove the Belt Clip, press the tab
inwards (using a screwdriver, if needed)
toward the belt clip. Slide out and replace
with the cover.

Installing the Handset Battery

1. Remove the battery cover from the handset.

2. Slide the top of the battery into position, then lower the bottom portion into

place. Note that the battery and handset both have positive and negative
indications. Make sure to place the battery in the handset so the indications
match.

3. Replace the battery cover.

- 1

85456 - 5a

900ia.qxd 3/26/01 8:51 AM Page 8

Summary of Contents for 900i







































































































































Search results

Summary of Contents for 900i

Reviews:

Related manuals for 900i

Brands by name

Popular brands

NEC 900i, Installation And User Manual

Search results

Summary of Contents for 900i

Reviews:

Related manuals for 900i

Brands by name

Popular brands