NEC 900i, Installation And User Manual

Page: 16 / 134

1. Installation
1-14
System Programming
The following system programming is suggested for the best operation of your
cordless phone:
Programming - Onyx VSi System
In program E8 - Ringing Line Preference:
1. Enable Ringing Ling Preference for the cordless phone’s extension
number.
In program KS - Programming Keys for Keysets:
1. Assign a loop key to one of the function keys. The system default
setting has the function keys programmed for lines
1 - 4. By assigning a loop key, all required lines can be accessed
(To assign a Loop Key, enter ‘9’ in KS program).
In program E2 - Extension Circuit Type:
1. Enter the circuit type of “02” for the cordless phone’s extension
number.
In addition to the other normal keyset programming, the following programs
can be set so an optional desk phone can be used in addition to the cordless
phone:
In program E9 - Direct Termination or Operator Extension:
1. Enter the cordless phone’s extension number. At the prompt “DIR
TERM OR OPR EXT”, enter the extension number of the desk
phone.
In program KS - Programming Keys for Keysets:
1. For the desk phone, assign a Station Pickup key with the cordless
phone’s extension number (to assign a Station Pickup key, enter ‘S’
+ extension number in KS program).
Programming - i-Series System
In program 0004 - Automatic Extension Circuit Type Setup:
1. Have the system automatically set the circuit type for each exten-
sion (the cordless phone is identified as circuit type 1).
In program 1006 - Programming Functions Keys (or SC 851):
1. Assign a loop key to one of the function keys. The system default
setting has the function keys programmed for lines
1 - 4. By assigning a loop key, all required lines can be accessed
(enter code 1078 - option 2).
900ia.qxd 3/26/01 8:51 AM Page 14