manualshive.com logo in svg

Nautel NX5 AM, Operation & Maintenance Manual

Share
Download
Nautel NX5 AM Operation & Maintenance Manual Download Page 113

NX5 OPERATION & MAINTENANCE MANUAL

OPERATING THE TRANSMITTER

VERSION 0.1  2015-08-01

PAGE 3.2.93

Email Configuration

NOTE

: This function is only available via the remote AUI.

The Email Configuration page (see 

Figure 3.2.81

) allows you to configure email parameters (e.g., email 

server and port number), and is required if the notification feature is used (see 

Notifications, on page 

3.2.95

). 

NOTE

: Nautel recommends that the following settings be entered/vetted by a qualified Network 

Administrator.

Figure 3.2.81: Email Configuration page

To configure the email feature, perform the following steps:

1.

Open the 

User Settings

 page by clicking 

Menu -> User Settings

 in the 

Home

 page.

2.

Select the 

Email Configuration

 option (left-side of the screen) (see 

Figure 3.2.81

) to display 

related information and associated parameters on the right-side of the screen.

Summary of Contents for NX5 AM





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands