manualshive.com logo in svg

Nautel NX5 AM, Operation & Maintenance Manual

Share
Download
Nautel NX5 AM Operation & Maintenance Manual Download Page 179

NX5 OPERATION & MAINTENANCE MANUAL

OPERATING THE TRANSMITTER

VERSION 0.1  2015-08-01

PAGE 3.2.159

Transmitter Frequency

You can adjust the transmitter’s carrier frequency using the remote AUI (see 

Adjusting Transmitter 

Frequency - Using the Remote AUI

) or the local front panel UI (see 

Adjusting Transmitter Frequency - Using 

the Front Panel UI, on page 3.2.160

). If you change the frequency on the front panel UI, it will also be 

reflected on the remote AUI, and vice versa.

Do not change the carrier frequency unless you are performing a frequency change procedure.

Adjusting Transmitter Frequency - Using the Remote AUI

The remote AUI’s 

Transmitter Frequency

 

page (see 

Figure 3.2.145

) displays the precise carrier 

frequency of the transmitter. Click the 

Apply

 button to save changes.

Figure 3.2.145: Factory Settings - Transmitter Frequency Page

WARNING! 

Factory settings are established at Nautel and should not require 

adjustment. These settings affect critical system protections. Making changes to 
these settings may void your warranty. Contact Nautel before making changes. 
For future reference, record a parameter value before and after making a change.

Summary of Contents for NX5 AM





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands