manualshive.com logo in svg

Nautel NX5 AM, Operation & Maintenance Manual

Share
Download
Nautel NX5 AM Operation & Maintenance Manual Download Page 51

NX5 OPERATION & MAINTENANCE MANUAL

OPERATING THE TRANSMITTER

VERSION 0.1  2015-08-01

PAGE 3.2.31

Viewing Instrument Panels 

The remote AUI provides up to 12 instrument panels (depending on purchased options) that you can 
choose to display on the remote AUI’s Home page. Up to four instrument panels can be displayed at one 
time, including a spectrum analyzer. To view all the instrument options (see 

Figure 3.2.19

), close one of 

the existing instrument panels on the 

Home

 page by clicking 

X

 in the top, right corner of the 

instrument panel, and then click anywhere in the blank space. This section includes the following 
topics:

Describing Instrument Panel Options, on page 3.2.32

Viewing Instrument Panels, on page 3.2.33

Instrument Panel Usage, on page 3.2.33

Available Instrument Panels, on page 3.2.35

Figure 3.2.19: Instrument Panels on Home page

Click on the desired instrument panel to display it. See 

Table 3.2.3 on page 3.2.32

 for a description of 

each instrument panel.

Summary of Contents for NX5 AM





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands