Nautel NX5 AM, Operation & Maintenance Manual

Page: 104 / 220

NX5 OPERATION & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.84 VERSION 0.1 2015-08-01
Copy Another Preset
When you select
Copy Another Preset
from the
Preset
editing options screen, you can copy the
settings from another preset into the preset that is being edited (see Figure 3.2.74 ).
Figure 3.2.74: Copy Another Preset Screen
Use the up and down buttons to select the preset that you wish to copy to the selected preset for
editing (e.g., Copy Active Preset, Copy Preset 2, etc.) or select Cancel. Press the accept (checkmark)
button to save the change. Press the cancel (
X
) button to discard changes and return to the previous
menu.
Resetting Alarms
You can attempt to reset any latching transmitter alarms that are holding the transmitter in an “off-air”
state using the remote AUI’s
Reset
button (see page 3.2.17 ) or using the local front panel display (see
Resetting Alarms - Using the Front Panel ).
Resetting Alarms - Using the Front Panel
When you select
Reset Alarms
from the
Main Menu
, you can attempt to reset latched protection
circuits in the NX5 (see Figure 3.2.75 ). If the alarm condition has been cleared, the alarm indication on
the
View Alarms
screen should disappear.
Figure 3.2.75: Reset Alarms Screen
Use the up and down buttons to toggle between
Reset Alarms
and
Cancel
. Press the accept
(checkmark) button to save the change. Press the cancel (
X
) button to return to the previous menu.