Nautel NX5 AM, Operation & Maintenance Manual

Page: 53 / 220

NX5 OPERATION & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.1 2015-08-01 PAGE 3.2.33
Viewing Instrument Panels
Each instrument panel has a unique tool bar that may be different from other panels (see Figure 3.2.20 ).
Figure 3.2.20: Instrument Panel Tool Bars
Instrument Panel Usage
Observe the following guidelines when using instrument panels:
 To enlarge/reduce the instrument panel, use the maximize/minimize buttons. Some instrument
displays show more information when maximized (
e.g.,
Signal Constellation,
see
Figure 3.2.30 on
page 3.2.42
)
.
 To display a cursor in the panel, which only applies to the Spectrum Analyzer, Smith Chart, EQ
instruments, AM-AM Correction, AM-PM Correction and Power Distribution Plot, click on the
instrument panel where you want the cursor (see
Figure 3.2.21 on page 3.2.34 ). The cursor position
and value are noted in the upper, right-hand corner of the panel (e.g., frequency and amplitude for
the spectrum analyzer).
 To make fine adjustments, use the backward and forward buttons (see Figure 3.2.20 ).
Each panel has a tool bar at the top of the display
Backward one step
Forward one step
Maximize / Minimize
Cog (more settings)
Exit
Peak (jumps cursor to
the next peak)
Zoom in
Zoom out