manualshive.com logo in svg

Nautel NX5 AM, Operation & Maintenance Manual

Share
Download
Nautel NX5 AM Operation & Maintenance Manual Download Page 128

NX5 OPERATION & MAINTENANCE MANUAL

OPERATING THE TRANSMITTER

PAGE 3.2.108

VERSION 0.1  2015-08-01

Monitoring NTP Servers

The 

NTP Server Status

 section displays tabular information on the NTP servers connected to the 

network. The table includes remote name, IP address, delay, offset and jitter.

Remote Name: 

Displays the host name of the referenced time source. An asterisk (*) in the 

first column marks the reference time source that is currently preferred by the NTP daemon. A 
‘+” character in the first column marks high quality candidates for the reference time that 
could be used if the currently selected reference becomes unavailable.

IP

: Displays the IP address associated with the 

Remote Name

. In some cases the 

Remote 

Name

 could be the IP address.

Delay:

 Displays the round-trip delay (in ms) of the time queries.

Offset:

 Displays the difference (in ms) between the reference time and the system clock.

Jitter:

 Displays the magnitude of jitter (in ms) between several time queries.

Managing NTP Servers

The 

Manage Servers

 section displays the NTP server files that have been added. You can 

Add

 to the 

list of NTP servers (see 

Figure 3.2.93

) or 

Delete

 a selected NTP server from the list. 

Figure 3.2.93: Add NTP Server

Summary of Contents for NX5 AM





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands