manualshive.com logo in svg

Nautel NX5 AM, Operation & Maintenance Manual

Share
Download
Nautel NX5 AM Operation & Maintenance Manual Download Page 183

NX5 OPERATION & MAINTENANCE MANUAL

OPERATING THE TRANSMITTER

VERSION 0.1  2015-08-01

PAGE 3.2.163

Configuring Remote Inputs and Outputs

You can configure your remote input/output interface for the transmitter using the remote AUI (see 

Remote I/O Settings - Using the Remote AUI

) or using the local front panel UI (see

 

Remote I/O Settings - 

Using the Front Panel UI, on page 3.2.168

).

Refer also to the NX5 Pre-installation Manual for information on remote inputs and outputs and their 
factory default settings.

Remote I/O Settings - Using the Remote AUI

To view the 

Remote I/O 

page (see 

Figure 3.2.150

), select 

Remote I/O

 from the 

Menu

 options. Click 

X

 

in the upper, right corner to close this page and return to the home page.

Figure 3.2.150: Remote I/O Page (Inputs tab selected)

Click the 

Remote Inputs

 (see 

Remote Inputs - Remote AUI, on page 3.2.164

) or 

Outputs

 (see 

Remote 

Outputs - Remote AUI, on page 3.2.166

) tab to view or edit detail on the digital inputs or outputs.

Summary of Contents for NX5 AM





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands