manualshive.com logo in svg

Nautel NX5 AM, Operation & Maintenance Manual

Share
Download
Nautel NX5 AM Operation & Maintenance Manual Download Page 153

NX5 OPERATION & MAINTENANCE MANUAL

OPERATING THE TRANSMITTER

VERSION 0.1  2015-08-01

PAGE 3.2.133

Power Thresholds

The 

Power Thresholds

 page (see

 

Figure 3.2.114

) allows you to set two distinct low forward power 

thresholds the transmitter. These thresholds are for monitoring purposes only. The transmitter will not 
shut back if these thresholds are crossed, but alarm notifications are generated for each of the two 
thresholds (

Low Forward Power Threshold 1

 and 

Low Forward Power Threshold 2

) on the 

Transmitter 

Status

 page.

Figure 3.2.114: System Settings - Power Thresholds

1.

Select 

Power Thresholds

 from the left side of the 

System Settings

 page to open a related 

window on the right side of the page.

2.

Enter the desired low power threshold level for each of the two options, noting the level represents 
the percentage of the normal operating setpoint. The default settings for 

Low Forward Power 

Threshold 1

 and 

2

 are 50% and 25%, respectively.

3.

Click 

Apply

 to activate the change(s) or click 

Cancel

 to abort.

Summary of Contents for NX5 AM





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands