National Lab OCGE 111, Operating And Maintenance Manual

Page: 108 / 194

11
MODELS: PCGE 1300, PCGE 1900, PCGE 2200
MODELS A B H C D E F G I L M ( “ )
PCGE 1300 to 2200 1525 3990 2140 2060 381 100 / / 200 310 / 3 ’
4. TRANSPORT/ PACKAGING/ STORAGE
4.1 REMOVING THE PACKAGING AND HANDLING THE CHILLER
Each chiller is supplied in a reinforced carton on a wooden pallet. The chiller must be kept in an upright position at
all times. NOTE: Tilting the chiller may cause serious damage!
Procedure:
* Remove the strapping from the carton. Always wear safety gloves when using scissors
or other tools to cut the straps.
* Remove the carton.
* Raise the chiller using suitable lifting gear.
NOTE: If the chiller is fitted with eyebolts, these must be used for lifting it in accordance with the applicable
safety standards.
If the chiller is not fitted with eyebolts, the lifting gear must be appropriate for the weight of the chiller, as indi-
cated on the identification plate and in the Annex.
* Remove the pallet (if present).
* Place the chiller in the desired location.
* Remove the operating manual, accessories and key from the chiller.
PCGE 81- PCGE 3300
4.2 DISPOSAL OF PACKAGING MATERIALS
We recommend that you keep the original packaging for the chiller in case it has to be transported to another loca-
tion or sent to a service centre. In any case, the waste packaging material must be deposited with the responsible
waste disposal companies.
4.3 STORAGE
The chiller must be stored in rooms protected from weather-related influences. These rooms must be dry and have
a temperature range of b5 and +50 ± C.