![background image](http://html.mh-extra.com/html/national-instruments/flexdmm-pxi-4071/flexdmm-pxi-4071_calibration-procedure_709945010.webp)
10
|
ni.com
|
NI 4071 7½-Digit FlexDMM Calibration Procedure
10. Call the niDMM Read VI.
11. Use a writable niDMM property node to set the input resistance of the NI 4071 to 10 M
.
LabVIEW Block Diagram
C/C++ Function Call
Call
niDMM_read
with the
following parameters:
Instrument_Handle
:
The instrument
handle from
niDMM_init
Reading
: The measurement returned
by the function. Subtract the
previously stored 100 mV >10 G
mode offset value from
this measurement. Verify that this
measurement falls between the limits
listed in Table 20.
Maximum_Time
:
–1
LabVIEW Block Diagram
C/C++ Function Call
Call
niDMM
SetAttributeViRea
l64
with the following
parameters:
Instrument_Handle
:
The instrument handle
from
niDMM_init
Attribute_ID
:
NIDMM_ATTR_INPUT_
RESISTANCE
Attribute_Value
:
NIDMM_VAL_10_MEGA
OHM