NAiS EBL512, Operating Instructions Manual

Page: 3 / 116

Matsushita Electric Works Fire & Security Technology AB
MEW00442 Rev: - Operating Instructions EBL512, V1.44.x
1
Table of contents
1 Introduction________________________________ 5
2 Definitions / Explanations ____________________ 6
2.1 MFSTech_________________________________________ 6
2.2 Alarm points ______________________________________ 6
2.2.1 Smoke detector _______________________________ 6
2.2.2 Sensor ______________________________________ 6
2.2.3 Analog detector _______________________________ 6
2.2.4 (Analog) Sensor Base (ASB)_____________________ 6
2.2.5 Conventional detector __________________________ 6
2.2.6 Conventional Detector Base (CDB) _______________ 6
2.2.7 Addressable Detector Base (ADB) ________________ 6
2.2.8 Addressable __________________________________ 7
2.2.9 Old detector __________________________________ 7
2.2.10 External line / Conventional zone line _____________ 7
2.2.11 ADB input / Addressable zone interface ____________ 7
2.3 Output unit _______________________________________ 7
2.4 Output / Control output ______________________________ 7
2.5 Short circuit isolator ________________________________ 7
2.6 Display unit _______________________________________ 7
2.7 COM loop ________________________________________ 7
2.8 BS4 loop _________________________________________ 7
2.9 Control Unit (C.U.) / C.I.E.___________________________ 8
2.10 Fire Brigade Panel (FBP) ____________________________ 8
2.11 Control panel (CP) _________________________________ 8
2.12 System___________________________________________ 8
2.13 Network / TLON
®
/ LonWorks
®
/ Echelon / Node / TLON
Conn. board / Gateway / Channel / Router / Repeater ____________ 8
2.14 LED_____________________________________________ 9
2.15 External Indicator (LED) ____________________________ 9
2.16 Display / LCD _____________________________________ 9
2.17 Door open / Key switch______________________________ 9
2.18 SSD / Site Specific Data _____________________________ 9
2.19 SW / Software / System program ______________________ 9
3 Overview _________________________________ 10
3.1 The EBL512 system _______________________________ 10
3.1.1 Expansion boards ____________________________ 10
3.1.2 Printer _____________________________________ 10
3.2 SW versions _____________________________________ 10
3.3 Documents_______________________________________ 11
3.4 Applications _____________________________________ 11
3.5 PC SW__________________________________________ 11
4 Control Unit ______________________________ 12