Matsushita Electric Works Fire & Security Technology AB
MEW00442
Rev: -
Operating Instructions EBL512, V1.44.x
20
6.4
Access level 4
From access level 2
18
, the user can login to access level 4, which gives
access to the following menus, normally used by a Service /
Commissioning Engineer:
Same menus as in access level 2 and 3 plus the following:
H5 Programming
A1 Calibration of monitored outputs
A2 Sensitive fault detection mode
A3 Direction for communication on COM loop (and BS4 loop)
A4 Show information about site specific data.
A5 Display current consumption in unit
A6 Display current consumption on COM-/BS4-loop
A7 Display statistics for COM-loop
A8 Select unit on COM-loop (and BS4 loop) to use for triggering
A9 Change access code for PC-communication (access level 5).
A10 Change access code for programming (access level 4).
6.5
Access level 5
Used by Service / Commissioning Engineer when a PC is to be
connected to the control unit, i.e. when Win512 is to be used for
backup, downloading site specific data, downloading SW / settings /
configurations / C.U. and system data, on-line status checking, etc.
18
If code for access level 4 has been used to login to access level 2, new
login to access level 4 is not required.
