Matsushita Electric Works Fire & Security Technology AB
MEW00442
Rev: -
Operating Instructions EBL512, V1.44.x
10
3 Overview
3.1
The EBL512 system
EBL512 is a microprocessor controlled intelligent fire alarm system,
intended for analog addressable smoke detectors, as well as
conventional detectors and manual call points. Programmable control
outputs and output units are available. Up to 512 addresses can be
connected to each control unit (c.i.e.).
Regarding alarm points, outputs, display units, etc. see chapter
"Definitions / Explanations", page 6.
EBL512 is available in several types, versions and configurations. It
can be connected to a TLON network, a "system", with up to 30
independent control units. Each control unit has total access to all
information.
EBL512 is designed according to the European standards EN 54, part
2 and 4.
3.1.1 Expansion
boards
In the control unit (c.i.e.) it is possible to mount up to six expansion
boards. The following types are available:
1580
8 zones expansion board
1581
8 relays expansion board
1582
External FBP interface board
2
1583 German FBP interface board
3
1584 Autronica interface board (four BS4 loops)
4
Regarding the expansion boards, see the EBL512 Planning
Instructions.
3.1.2 Printer
In control unit 1548 it is possible to mount a 1558 Printer.
3.2 SW
versions
Due to continual development and improvement, different SW
versions could be found. When installing a new control unit in a
system with "older" control units, you may have to update the SW in
the old control units.
2
Max. two 1582 boards per C.U.
3
Max. one 1583 board per C.U. 1583 board is
not
possible to use in
Swedish convention.
4
Max. four 1584 boards per C.U.
